View 7NC80ZFP_217303.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STP7NC80Z - STP7NC80ZFP STB7NC80Z - STB7NC80Z-1
N-CHANNEL 800V - 1.3 - 6.5A TO-220/FP/D2PAK/I2PAK Zener-Protected PowerMESHTMIII MOSFET
TYPE STP7NC80Z STP7NC80ZFP www..com STB7NC80Z STB7NC80Z-1
s s
VDSS 800 800 800 800 V V V V
RDS(on) < < < < 1.5 1.5 1.5 1.5
ID 6.5 A 6.5 A 6.5 A 6.5 A TO-220
3 1
s s s
TYPICAL RDS(on) = 1.3 EXTREMELY HIGH dv/dt AND CAPABILITY GATE TO - SOURCE ZENER DIODES 100% AVALANCHE TESTED VERY LOW GATE INPUT RESISTANCE GATE CHARGE MINIMIZED
D2PAK
3 1 2
TO-220FP
12
3
I2PAK (Tabless TO-220) DESCRIPTION The third generation of MESH OVERLAYTM Power MOSFETs for very high voltage exhibits unsurpassed on-resistance per unit area while integrating back-to-back Zener diodes between gate and source. Such arrangement gives extra ESD capability with higher ruggedness performance as requested by a large variety of single-switch applications.
INTERNAL SCHEMATIC DIAGRAM
APPLICATIONS SINGLE-ENDED SMPS IN MONITORS, COMPUTER AND INDUSTRIAL APPLICATION s WELDING EQUIPMENT
s
ORDERING INFORMATION
SALES TYPE STP7NC80Z STP7NC80ZFP STB7NC80ZT4 STB7NC80Z-1 MARKING P7NC80Z P7NC80ZFP B7NC80Z B7NC80Z PACKAGE TO-220 TO-220FP D2PAK I2PAK PACKAGING TUBE TUBE TAPE & REEL TUBE
May 2003
1/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter STP7NC80Z STB7NC80Z STB7NC80Z-1 VDS VDGR VGS ID
www..com
Value STP7NC80ZFP 800 800 25 6.5 4 26 135 1.08 50 3 3 --65 to 150 150 2000 6.5 (*) 4(*) 26 (*) 40 0.32
Unit
Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuous) at TC = 25C Drain Current (continuous) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C Derating Factor Gate-source Current Gate source ESD(HBM-C=100pF, R=1.5K) Peak Diode Recovery voltage slope Insulation Withstand Voltage (DC) Storage Temperature Max.Operating Junction Temperature
V V V A A A W W/C mA KV V/ns V C C
ID PTOT IGS
IDM ( )
VESD(G-S) dv/dt VISO Tstg Tj
( ) Pulse width limited by safe operating area (*) Limited only by maximum temperature allowed
THERMAL DATA
TO-220 / D2PAK / I2PAK Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max Maximum Lead Temperature For Soldering Purpose 0.93 30 300 TO-220FP 3.13 C/W C/W C
AVALANCHE CHARACTERISTICS
Symbol IAR EAS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Single Pulse Avalanche Energy (starting Tj = 25 C, ID = IAR, VDD = 50 V) Max Value 6.5 290 Unit A mJ
GATE-SOURCE ZENER DIODE
Symbol BVGSO T Rz Parameter Gate-Source Breakdown Voltage Voltage Thermal Coefficient Dynamic Resistance Test Conditions Igs= 1mA (Open Drain) T=25C Note(3) ID = 20 mA, Min. 25 1.3 90 Typ. Max. Unit V 10-4/C
PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components.
2/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
ELECTRICAL CHARACTERISTICS (TCASE =25C UNLESS OTHERWISE SPECIFIED) ON/OFF
Symbol V(BR)DSS Parameter Drain-source Breakdown Voltage Test Conditions ID = 250 A, VGS = 0 ID = 1 mA, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125 C VGS = 20V VDS = VGS, ID = 250A VGS = 10V, ID = 3.3 A 3 4 1.3 Min. 800 0.9 1 50 10 5 1.5 Typ. Max. Unit V V/C A A A V
BVDSS/TJ Breakdown Voltage Temp. Coefficient IDSS IGSS
www..com
Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Gate Threshold Voltage Static Drain-source On Resistance
VGS(th) RDS(on)
DYNAMIC
Symbol gfs (1) Ciss Coss Crss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Parameter Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDS > ID(on) x RDS(on)max, ID = 3.3 A VDS = 25V, f = 1 MHz, VGS = 0 Min. Typ. 6 2350 164 17 Max. Unit S pF pF pF
SWITCHING ON
Symbol td(on) tr Qg Qgs Qgd Test Conditions VDD = 400 V, ID = 3 A RG = 4.7 VGS = 10 V ( see test circuit, Figure 3) VDD = 640 V, ID = 6 A, VGS = 10V Min. Typ. 33 12 43 12 15 58 Max. Unit ns ns nC nC nC
SWITCHING OFF
Symbol tr(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions VDD = 640 V, ID =6 A, RG = 4.7, VGS = 10V (see test circuit, Figure 5) Min. Typ. 13 13 20 Max. Unit ns ns ns
SOURCE DRAIN DIODE
Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD =6.1 A, VGS = 0 ISD = 6 A, di/dt = 100A/s VDD = 40V, Tj = 150C (see test circuit, Figure 5) 680 6 18 Test Conditions Min. Typ. Max. 6.5 26 1.6 Unit A A V ns C A
Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. 3. VBV=T(25-T) BVGSO(25)
3/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
Safe Operating Area For TO-220/I2PAK Thermal Impedance For TO-220/D2PAK/I2PAK
www..com
Safe Operating Area For TO-220FP
Thermal Impedance For TO-220FP
Output Characteristics
Transfer Characteristics
4/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
Transconductance Static Drain-source On Resistance
www..com
Gate Charge vs Gate-source Voltage
Capacitance Variations
Normalized Gate Threshold Voltage vs Temp.
Normalized On Resistance vs Temperature
5/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
Source-drain Diode Forward Characteristics
www..com
6/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform
www..com
Fig. 3: Switching Times Test Circuit For Resistive Load
Fig. 4: Gate Charge test Circuit
Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times
7/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
TO-220 MECHANICAL DATA
DIM. MIN. A C 4.40 1.23 2.40 1.27 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 13.0 2.65 15.25 6.2 3.5 3.75 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.645 0.551 0.116 0.620 0.260 0.154 0.151 mm TYP. MAX. 4.60 1.32 2.72 MIN. 0.173 0.048 0.094 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 inch TYP. MAX. 0.181 0.051 0.107
www..com
D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA.
A
C
D1
L2
D
F1
G1
E
Dia. L5 L7 L6 L4
P011C
L9
8/13
F2
F
G
H2
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.5 1.5 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D
www..com
E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
G
9/13
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
TO-262 (I2PAK) MECHANICAL DATA
mm MIN. A 4.4 2.49 0.7 1.14 0.45 1.23 8.95 2.4 10 13.1 3.48 1.27 TYP. MAX. 4.6 2.69 0.93 1.7 0.6 1.36 9.35 2.7 10.4 13.6 3.78 1.4 MIN. 0.173 0.098 0.027 0.044 0.017 0.048 0.352 0.094 0.393 0.515 0.137 0.050 inch TYP. MAX. 0.181 0.106 0.036 0.067 0.023 0.053 0.368 0.106 0.409 0.531 0.149 0.055
DIM.
www..com
A1 B B2 C C2 D e E L L1 L2
A
C2
B2
B
E
L1 L2 D L
P011P5/E
10/13
e
A1
C
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
D2PAK MECHANICAL DATA
mm. DIM. MIN. A A1
www..com
inch MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 10.4 0.393 0.334 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4 0.208 0.625 0.055 0.068 0.126 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368
TYP
4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10 8.5 4.88 15 1.27 1.4 2.4 0.4 0
A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2
3
11/13
1
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
D2PAK FOOTPRINT
TUBE SHIPMENT (no suffix)*
www..com
TAPE AND REEL SHIPMENT (suffix "T4")*
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W
12/13
BASE QTY 1000
mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1
inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574
0.35 0.0098 0.0137 0.933 0.956
* on sales type
STP7NC80Z - STP7NC80ZFP - STB7NC80Z - STB7NC80Z-1
www..com
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2003 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com
13/13

▲Up To Search▲

Price & Availability of 7NC80ZFP

	To Download 7NC80ZFP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .